Cast Opaque Films Specifications

STYLETECHTM V-2000 SERIES 2 MIL CAST FILM 5-8 YEARS (.05 - .055 MM)

Typical Physical Properties: 2 MIL premium cast film with permanent acrylic adhesive.

A. PHYSICAL PROPERTIES:
PVC Film Thickness (mils)
2.00
PSA Thickness (mils)
1.2
Liner (weight)
78 LBS.
Tensil strength (lbs/in. break load)
4.5
Elongation Metallics
70% - 120%
Elongation Non-Metallics

100% - 200%


B. ADHESION PROPERTIES: oz/in.
PSTC - 1
(Instant R.T.) 50
PSTC
(1 hr. R.T.)  Stainless Steel 65
PSTC
(24 hr. R.T.)  Stainless Steel 75
PSTC
(72 hr. R.T.)  Stainless Steel 95
PSTC
(1 hr. R.T.)  Stainless Steel 90
PSTC
(1 hr. R.T.)  Aluminum 68
PSTC
(1 hr. R.T.)  Acrylic Lacquer 80
PSTC
(1 hr. R.T.)  Ford Acrylic Enamel 70
PSTC
(1 hr. R.T.)  Chrome 60
PSTC
(1 hr. R.T.)  Polycarbonate 70
PSTC
(1 hr. R.T.)  Glass 100
PSTC
(1 hr. R.T.)  Latex Paint 110
PSTC
(1 hr. R.T.)  Pebble Grain 55
PSTC

(24 hr. R.T.)  Pebble Grain

70


C. RESISTANCE: No change to following OEM Tests:

1. Fords acid environment
2. Fords solvent and water environment
3. Fords boiling water emersion
4. Fords various fuel emersions
5. 3 to 1 Zylene/Mineral Spirits emersion
6. Nissan Salt Spray

D. AGING: Passed OEM's 2 year South Florida aging - South Florida exposure.

E. HEAT SHRINKAGE: .0075

F. SERVICE TEMPERATURE: -60º F - 200º F

G. SHELF LIFE: 1 Year stored under 73º F and 50% relative humidity.

H. OUTDOOR DURABILITY: 5 to 8 years when properly converted and properly applied, vertical exposure, and non-printed.

NOTE:
All information based on tests believed to be reliable. These values do not constitute guaranty and do not constitute a warranty. Purchaser is to independently determine suitability of this material for specific purpose.


ŠTape Technologies, Inc. - PO Box 56 - Green Cove Springs, Florida - 32043
800-433-0541 toll free - 904-284-0393 fax

Site Design & Maintenance By : DEParkins.com